The “Dirty Dingo” adjustable motor mounts are precision CNC water-jet cut from .250 plate steel. These Patent Pending Design motor mounts are for installing the ’99-’09 Gen III/IV LS series engine into older 2WD GMC trucks, Blazers, and Suburbans.

 Welded and cooled in a jig to retain precision alignment. These mounts are rubber mounted, not solid, and retain the factory rubber engine mount. Grade-8 hardware is included. The key factor to these motor mounts is the adjustability, which allows you to position the LS engine correctly in the engine compartment. The motor mounts are slotted allowing you to move your engine 1-inch forward, or 2 inches rearward. These mounts facilitate the installation of TH350, TH400, TH700R4, 4L60E, 4L65E, 4L80, and any other combination of standard or automatic transmissions. There will be no need to find a special oil pan either because these mounts put the motor in the proper place to clear the factory steering or sway bar.

Dirty Dingo Motorsports
480/824-1968
www.dirtydingo.com